New! Timing Belt For Machine knitting Brother KH-260

Mounting the timing belt
1.Put the timing belt over the clutch wheel and the pulley on both sides with the belt connecting pin kept inward.
-On the pulley side,pass the belt from the front side by fitting the belt connecting pin to the shallow concave part of the pulley
**Put the belt slot to the concave part indicated with the * mark on the pulley.
-On the clutch wheel sides,pass the belt from the front side by fitting the belt connecting hole to the shallow concave part of the clutch wheel.
2.loosen the left screw for pulley adjusting plate ,then the belt is stretched by the spring pressure.
3.Adjusted the pulley adjusting plate to 0.6-1.0mm and fix it with the screw.